Polymer Nation F-80 Fast Speed 93% Solids Pigmented Polyaspartic
Product Overview
Polymer Nation F-80 combines a pigmented polyaspartic resin blend with an aliphatic hardener blend to create a fast-speed, pigmented polyaspartic. F-80 is a 93% solids, low-odor, low-viscosity product with a short working time and fast dry time, allowing multiple steps to be completed in one day. Its opacity helps create a solid-looking finish with as little as 6 mils WFT.
Uses and Benefits
F-80 is primarily used as a one-day floor system. It can be applied directly to concrete as a primer and broadcast resin and be ready for recoat within 2 hours. It has excellent UV, abrasion, and hot-tire resistance.
Technical Data Sheet
The data below was gathered at temperatures of 72-75°F and 30-50% RH.
| Number of Components | 2 |
| Mix Ratio (Part A:Part B) | 2:1 |
| Mixed Viscosity | 500-700 cP at 25°C/77°F |
| Gel / Working Time | 5-10 minutes |
| Application Temperature | 40-80°F |
| Dry to Touch | 0.5-1 hours |
| Through Dry | 1-2 hours |
| Dry to Walk | 2-4 hours |
| Dry to Light Use | 8-12 hours |
| Full Cure | 7 days |
| Pendulum Hardness (König) | 20 @ 24 hours / 50 @ 7 days |
| Gloss @ 60° | >90 |
| VOC (Mixed) | <100 g/L |
| Solids by Volume | 93% |
| Application Thickness | 5-15 mils on floors; 5-6 mils on walls |
| Available Colors | White, Light Gray, Warm Sun |