Polymer Nation F-10 TD Pigmented Epoxy Trowel Mortar
Product Overview
Polymer Nation F-10 TD combines their pigmented, nonylphenol-free, epoxy resin, their blended cycloaliphatic reactant and Trowel Aggregate PN 1324 to create the easiest troweling material available anywhere. This combination achieves an easily closed, pigmented epoxy mortar that can be walked on within a few hours. The cured material has high compressive strength (three times that of concrete) , great impact resistance and a broad range of resistance to chemical attack. It is virtually odor-free.
Uses and Benefits
Polymer Nation F-10 TD is primarily used as a fast setting epoxy overlay to protect and/or repair concrete. Because it is a mortar, it is the ideal material for sloping floors and creating ramps and transitions. It can also be used to fill deep pits, cracks and voids in concrete floors and walls.
Technical Data
The data below was gathered at temperatures of 72-75°F and 30-50% RH
| Packaging | 4,220 Gallon kits |
| Mix Ratio by Volume | 2:1 |
| Mixed Viscosity | 500-600 A&B cP 25°C/77°F |
| Gel Time | 15 minutes |
| Dry to Touch | 1 hours |
| Through Dry | 3 hours |
| Dry to Walk | 4 hours |
| Dry to Light Use | 12 hours |
| Full Cure | 7 days |
| Shore D Hardness | D65 @ 24 hours |
| Shore D Hardness | D78 @ 7 days |
| Gloss @ 60 Degree Angle | 25-30 |
| VOC’s of Mixed Material | <50 g/l EPA Method 24 |
| Color Scale | N/A |
| Solids by Volume Mixed | 100% |
| Application in Mils | |
| Available Colors | White, Light Gray Medium Gray & Warm Sun |