Polymer Nation U-35 1K WB Sealer
$1.00
Product Overview
U-35 is an aliphatic, non-yellowing, one-component, water-based acrylic urethane sealer with excellent wear and abrasion resistance properes. It provides excellent protection against moisture penetration. U-35 has virtually no odor and its VOC content is less than 50 g/L. Because it is fast drying characteristics, multiple coats can be applied in a short amount of time.
Uses and Benefits
U-35 is used as a clear sealer over flake floor systems. This mid coat helps to lock the flake in, and easily accepts common topcoats such as PN F-61/71/81 or PN U-51. U-35 can also be applied over concrete or cementitious surfaces due to its excellent wear and abrasion resistance. A minimum of 2 coats is recommended for complete sealing of the substrate. Its low to zero odor makes U-35 an easy choice for indoor applications when sealing concrete and cementitious surfaces.
Technical Data
The data below was gathered at temperatures of 72-75°F and 30-50% R
| Mix Ratio by Volume | 1 |
| Mixed Viscosity | 150-350 cP 25°C/77°F |
| Work Time | N/A |
| Dry to Touch | 30-60 minutes |
| Through Dry | 60-90 minutes |
| Dry to Walk | 60-90 minutes |
| Dry to Light Use | 2-4 hours |
| Full Cure | 5-7 days |
| Pendulum Hardness (König) | 50 @ 24 hours |
| Pendulum Hardness (König) | 90 @ 7 days |
| Gloss @ 60 Degree Angle | >90 |
| VOC’s of Mixed Material | <50 g/l (before reducing) |
| Color Scale | 0.5-1.0 per ASTM D1500 |
| Solids by Volume Mixed | 35% |
| Application in Mils | 2-3 |
| Available Colors | Clear |
Additional information
| Packaging | 5 Gallon Pail |
|---|
