Polymer Nation F-10 TD Pigmented Epoxy Trowel Mortar

Polymer Nation F-10 TD Pigmented Epoxy Trowel Mortar

$1.00

Product Overview

Polymer Nation F-10 TD combines their pigmented, nonylphenol-free, epoxy resin, their blended cycloaliphatic reactant and Trowel Aggregate PN 1324 to create the easiest troweling material available anywhere. This combination achieves an easily closed,  pigmented epoxy mortar that can be walked on within a few hours. The cured material has high compressive strength (three times that of concrete) , great impact resistance and a broad range of resistance to chemical attack. It is virtually odor-free.

Uses and Benefits

Polymer Nation F-10 TD is primarily used as a fast setting epoxy overlay to protect and/or repair concrete. Because it is a mortar, it is the ideal material for sloping floors and creating ramps and transitions. It can also be used to fill deep pits, cracks and voids in concrete floors and walls.

Packaging

4 Galon Kit, 220 Gallon Kit

SKU: N/A Categories: ,

Description

Technical Data

The data below was gathered at temperatures of 72-75°F and 30-50% RH

Packaging 4,220 Gallon kits
Mix Ratio by Volume 2:1
Mixed Viscosity 500-600 A&B cP 25°C/77°F
Gel Time 15 minutes
Dry to Touch 1 hours
Through Dry 3 hours
Dry to Walk 4 hours
Dry to Light Use 12 hours
Full Cure 7 days
Shore D Hardness D65 @ 24 hours
Shore D Hardness D78 @ 7 days
Gloss @ 60 Degree Angle 25-30
VOC’s of Mixed Material <50 g/l EPA Method 24
Color Scale N/A
Solids by Volume Mixed 100%
Application in Mils
Available Colors White, Light Gray Medium Gray & Warm Sun

Additional information

Packaging

3 Gallon Kit + (4) 45 lb Bag Trowel Blend
Color

White, Light Gray, Medium Gray, Warm Sun

Related products